The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

how many parts could i use?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gavin1

15+ Year Contributor
45
0
Aug 27, 2006
newcomerstown, Ohio
i own a 92 2.0 laser,i can buy a 91 1.8 eclipse automatic,mine is a stick.now how many parts can i use for my 92? the 91 automatic tranny is messed up.i 'm hoping things like the altenator,starter etc . will fit my 92.well thanks for reading. the reason i mentioned that the automatic tranny is messed up is in case, someone asked about it.
 
There are very few things you can swap over to your car.

The starter is about the only thing that will fit both engines. The 1.8 and 2.0 SOHC engines, eclipse vs galant motors, have the same tranny, so the starter will bolt up. However the alternator is different as the front cover assemblies are different thicknesses. The 2.0 is much thicker than the 1.8. If you are buying it for parts for your car, you won't get much other than some body parts, and interior parts.
 
Well depending on the condition of the body, you could sell the fenders, headlights, and hood for more than that.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • For sale 4G63 7 Bolt Oil Filter Housing
    7 Bolt Oil Filter Housing $50 + shipping & paypal feesYou must be registered to see...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 2g WTB 2g GSX rack lines.
    Looking for the line pictured that goes from one side of the rack to the other. Just need one...
    • jakk220
    • Updated:
    • Expires
  • Wanted 1g 92-94 Hood Needed
    Looking for 92-94 1G 2.0 DSM hood to replace mine that is dented and in need of replacement...
    • JLavetsky
    • Updated:
    • Expires
  • For sale 4G63 Tomei 280/280 Solid Lifter Camshaft
    Bought these for my 6-Bolt CNC ported head that was sold not too long ago, and already have...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 1g WTB-23 spline transfer case- prefer 300m output
    23 spline upgraded t case - 1g
    • erikoberdorfer
    • Updated:
    • Expires
Back
Top