Head to exhaust mani bolts

[Blink92Talon]

So Im shopping for the nuts and bolts for the exhaust mani to the head and I found them on FP's site for a 1g but in the pic it shows 7 thinner bolts (im guessing 8cm) and 2 thicker ones (again guessing 10cm) because on www.diamondstarmotorsport.com they list the 1g as needing 9 of the 8cm bolts and the 2g as needing 2 10's and 7 8's... Can anyone confirm what I need for my 1g?

 

[HokieDSM]

SSStuds sells complete kits for DSMs, check them out:
http://www.ssstuds.com/

SlowBoyRacing also sells kits, along with the four turbo bolts - if you need them.

 

[Blink92Talon]

yeah ss shows the 1g as 9 of the same size and god damn is stainless pricey.. 2x as much as the standard ones... what are the ups of using the copper plated nuts?

 

[HokieDSM]

Well the standard studs are copper I believe - but the advantage of the SS is that you will most likely ever have to replace them, unlike the stockers which can break easily.

 

[Blink92Talon]

on SS they list a full stainless set for $30 and then stainless studs with copper plated nuts for $33.