GST Wiring Harnss Help

[jmb00st]

Ive looked for a wiring harness for my 95 gst with a 6 bolt in it for a while now. I got one that a guy said would fit, and when i tore my car apart and finally got ready to swap the harnesses out it wasnt the right one..I found another harness out of a 97 gst thats been cut for a 6 bolt already, will this one fit my 95 gst with a 6 bolt in it?
I need help before I waste more money on some wires..Thanks.

 

[black_gst]

1st the harness in your car is just fine
all you need is this
RRE's Eclipse New Products
2G Eclipse 1G Motor Swap CAS Harness
it about half way down the page

 

[jmb00st]

I saw that a few days ago, Sorry I forgot to mention that my wiring harness is completely burnt up, even through the firewall going back into the dash. Something shorted out I guess so a lot of the wires are all melted..So I'm going to need a new one . The car wont start, the windows wont go up..go figure, when it happened my window was halfway down. I had to get it put on a rollback and towed home...not the first time its seen the trailer .

 

[black_gst]

ok well you engine problem is related to the wire harness no doubt.... well whatever year harness you do get just make sure it matches the right harness the road race sells i would recomend you stick with a 95 if possible because there are a couple relays in the car that are different from 95 to 96 if you get the realys its not a problem but if you dont have them you will nedd to get them or you will have a problem

i put my 95 herness and ecu into my 96 so i can for sure tell you this, it possible that a late 95 is just like a 96 though because i have an early 95.

its easy to tell what year a harness is if you know what to look for