The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Gm 350 awd talon?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

burldude

15+ Year Contributor
200
0
May 2, 2004
Fort Bragg, California
Has anyone every seen such a thing ? In theory it could be done with minimal hassle . Just an adapter plate and flywheel mod and engine mounts and maybe a better radiator . Any thoughts?
 
Yeah, sounds like a minimal hassle mod. :laugh:
 
Have you ever put an engine in one of these cars? Have you ever put it a 350? Minimal hastle... I think not. To make a 350 fit in there in the first place you would have a TON of modifications to do. And how do you suppose it will fit??? Where will the tranny go?? It sure as hell won't fit in there sideways. Think about it a little more before you ask a question like that with a statement like that. You could do a RWD setup in one, but get ready to cut the hell out of the firewall and floor pan. ;) It would only be good for a drag car. If you want to even ponder such a thought, buy a Starion or Conquest and do a V8 conversion in it. That is what my other car is getting done to it in a couple of months. And I am not trying to be an ass, I just don't like it when people post stuff on here that is not even worth talking about.
 
Why would you ever want to swap something other than a 4G63 into a DSM. It's proven itself to be one of the most potent engines ever. And to put a V8 in a DSM....(gasp OMG ) it's almost sacreligious.
 
ok first youd need to trim the firewall a bit to squeeze tranny in there, our tannies will nto hold a 350 v8.

the block is to logn and wont fit in engine bay. youd need to relocate radiator to back of car. youd need to swap to solid axle rear and run a driveshaftys trimmign the middle of the car out. you need ot make a channel for driveshaft.

youd need to move both frotn seats out a bit to squeeze tranny bewteen them. tranny can not hiut body and youll have to make bump in middle bigger to even fit a th350 or a 700-r4 tranny

im nto gonna keep goign with this. ive put 350 chavys in a few htings and help build em up for all my friends trucks. you can not fit in in a 1g or 2g with less than abtou 10g's
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 2g 2G Power Window Switches ( tested and hardware included )
    2G Power Window Switches $55 + shipping and paypal fees* Tested 6/2/26 * Hardware included *...
    • jersygsx
    • Updated:
    • Expires
  • For sale VIRGIN 4G63 6-BOLT TURBO HEAD
    Came off a virgin stock AWD Auto 1G DMS (91), also have matching block and crank which are also...
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 6-BOLT TIMING COVER
    Used, see condition in photos. Buyer covers shipping / fees.
    • The_Partout_Spot
    • Updated:
    • Expires
  • For sale Garage clean out
    Changing setups on the car and getting rid of some stuff as well that's been laying around. Will...
    • 92GSXtacy
    • Updated:
    • Expires
  • For sale 4G63 Griffin intercooler cores
    Griffin intercooler cores. Top to bottom flow. High cfm and heat transfer. 24x8x2.75 and...
    • Galant665
    • Updated:
Back
Top