FP 4'' Aluminum Intake pipe on T25, T28, 16g style turbos

[matt97gst]

Forced Performance: "We now have a coupler to allow installation of this intake air tube onto 16g, 14g, T25, T28 style turbos! This coupler is like a little miracle. It allows the installation of our mongloid 4" diameter FPAIP on any stock style turbocharger for the DSM."

Anybody have it on their stock style turbocharger? That would leave plenty of room for future upgrades huh...any negative effects from a 4'' - 2.5'' coupler on the intake??

 

[98spydert]

Show me the turbo you plan to use on your dsm that has a 4 inch intake.

Look at the front page The FP GT3052 has a 4" inlet as many others do


I made my own intake also, check out the tech article section. I did a write up on it and it's pretty inexpensive and very easy.

 

[Pearl90TSI]

Ive got a turbo on my TSI with a 5" inlet

 

[ikickuintheball]

You just put a metal mesh filter over it at that point.

 

[DSM90AWD]

Looks like this won't fit a 1G (at least my '90).
With the 2G MAS installed.. I have 4" of clearance to my headlight mechanism.. not enough room for a filter

 

[jspec]

To bring this one back I have this FP setup and my J pipe seems to be in the way. Did anyone run into this issue. The one picture up there shows a ton of clearence mine just doesn't have room?