Fluids

[Gsx_Mitch]

Couldn't find a write up on fluids. How much gear oil do I put in in my transfer case, viscous 3 bolt rear diff. And What coolant mixture do you guys usually run.

 

[4Gwannabe]

I've never had to use more than 1 qt for my transfer case, make sure you check it on a level surface. Jafromobile has a good video on youtube worth watching.

But Just fill it up till it starts to over fill let it come to a stop and put your bolt back it. simple as that. same for the rear diff. The T-case doesn't typically take a lot of fluid nor does the Diff.

let me know how it goes!

 

[Flavoade]

http://www.roadraceengineering.com/eclfluids.htm

I run about 40/60 - 50/50. It doesn't get that cold down here.

I have found its easier to find things using google searching:

dsmtuners [Insert your topic]

and you get better results; sometimes

 

[4Gwannabe]

And for coolant, I typically run 50/50 Prestone mix

Most currently, for summer use, I've switch to water wetter which I've noticed really helps keep temps down.

 

[Gsx_Mitch]

Thanks for the info. Plan on using mt90 and redline shock proof heavyweight. Heard many mixed opinions but I have many friends who've ran it for 10 years +

 

[4Gwannabe]

Red line makes really top quality fluids, you haven't made a bad choice my friend. Only thing better I could think of would be Mitsubishi's Oem evo 9 6 speed trans fluid. This stuff Works great but it is rather expensive..

 

[Type1DSMr]

I use the Mitsubishi oem diaqueen fluid and the Mitsubishi lsd fluid good stuff. Buy in quarts and it not very expensive but if you buy the gallon jugs it's crazy expensive.

 

[Type1DSMr]

Best prices from jnztuning in quart sizes not gallon jug.
http://www.jnztuning.com/index.php?cPath=691_551

 

[GST with PSI]

http://www.dsmtuners.com/threads/ma...ll-this-mobile-1-be-ok.487454/#post-153478289