Finally got my logger help me fix my problems

[iron bird]

ok i got my logger and now its time to fix my 1g's problems.

We can start out with my codes i pulled

12 - MAFS
22 - Crank angle sensor
24 - speed sensor
25 - Barometric sensor

IF any one can let me know what be causing these please help me out.

 

[steve]

I don't think those share any wiring off hand. Make sure the MAF is plugged in, clear the codes and see if they all come back.

 

[iron bird]

yea none of those are right it was a misread by me on mmcd there were just stored not active. I Have no codes i will be getting a log up soon so my car runs right again.

 

[iron bird]

ok so my cars problem is when i set my maft to 450 injectors or use the stock maf the car hits what seems like a rev limiter around 4000 rpm and the car barley moves. But if i set my maft to 570 injectors it runs to where its drivable.

So i logged fuel trims and every one is at 100% no matter where the maft is programmed. what would cause this.