evo III gt turbo

[haze]

Okay so I just got an evo III gt turbo, but I have stock headers, is it possible to just bolt it right on to stock headers? if not where can i find the parts to make it fit? please help

 

[wimploki]

Okay so I just got an evo III gt turbo, but I have stock headers, is it possible to just bolt it right on to stock headers? if not where can i find the parts to make it fit? please help

Yes, it will bolt right up to your stock (headers for N/A Vehicles) exhaust manifold. A 2G install kit is required as well when upgrading from your T25 Stock turbo.

Check these vendors for 2G 16-G Install Kit.

www.roadraceengineering.com - http://www.roadraceengineering.com/2g16ginstallkit.htm

www.slowboyracing.com - http://www.slowboyracing.com/more.p...af&PHPSESSID=b2e54867e70ded3235fd86fa4be0e2af

www.turbochargers.com - http://www.turbochargers.com/images/evo316g/2gkit.jpg

You would need to upgrade your stock 2G oil return line as well. A 1G Oil return line (i have one for sale) is recommended for the setup.

Here's more info for a proper upgrade path. - http://www.dsmtuners.com/tuning-guide/2gturbo/

Good Luck

 

[trd-2-dsm]

yeah and make sure that the turbo you're getting really is a evo3

 

[travislaw]

yeah and make sure that the turbo you're getting really is a evo3

We already know that haze didn't get the Mitsu Evo3 because it is the Evo3 GT.

 

[boostedinaz]

Make sure you don't just put a turbo on and go running around until it blows up. Fallow the upgrade path and make sure you have proper suoperting mods before turning up the boost.

yeah and make sure that the turbo you're getting really is a evo3

The thread stated he is getting a GT, please read before responding. Along with that please don't bash somethign unless YOU have personal facts to back up your statement. So far the GT has proven to be better then people think.

 

[MrBoxx]

Okay so I just got an evo III gt turbo, but I have stock headers, is it possible to just bolt it right on to stock headers? if not where can i find the parts to make it fit? please help

You do not have "headers". You have a single exhaust manifold.

Header=Naturally Aspirated. HeaderS=more than one. Just for future reference.