The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Evo 3 16g Setup

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maxtsitalon

15+ Year Contributor
33
0
Jan 4, 2006
Wausau, Wisconsin
I bought the Evo 16g turbo and ported 2g manifold for my 92 fwd tsi. I was planning on buying 550cc injectors and a 190 lph fuel pump and SAFC 2. Should i get bigger injectors and and 255 injectors and fpr? I was told i would max out the 550's and the fuel pump. Also what type of numbers can i expect with this set up. I also have 2.5 inch exaust and the mods that are on my profile.
 
I dont know much about track runs and what to expect from these upgrades, but my guess is you would run maybe a 14? Then again, I dont know what to expect from FWD cars. Let me know if I helped any, or if you have any other questions.

Just for reference. I ran 14 flat on my stock 91 TSI FWD with only a boost controller and decent tires :)

Seriously though, at 20 psi on the Evo3 you should have no problems getting into the 13s at least
 
On the track up in Ak,

DSMs were running on high 12's with the small 16g's on 20+ psi. This is with supporting mods and fuel. We only have 90 octane fuel, so we bump it up w/ 10oz of torco per 10 gallons of fuel.

Howie~
 
On the track up in Ak,

DSMs were running on high 12's with the small 16g's on 20+ psi. This is with supporting mods and fuel. We only have 90 octane fuel, so we bump it up w/ 10oz of torco per 10 gallons of fuel.

Howie~


What is torco?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top