ECU EGRT Connector

[Calan]

I want to use the EGRT port on my federal ECU for an extra input to my logger.

Does anyone have a pic or description of the best place to tap into this for a 1G?

Thanks.

 

[eoseitz]

I have my ecu out right now and the analog cable from my wideband to ran. What color wire from the ecu should I be looking for? If you know what color wire I'll dig around and find a good place to splice in. I'll let you know.

 

[Auto RS T]

It's pin #15 on the ECU, light blue wire with a yellow tracer. A good way to do this would be by removing the old wire end from the ECU connector. Then install a wire end for the ECU on your wideband wire and snap it in, if you can locate one. Otherwise, cut the wire near the ECU and splice it on the ECU side of the wire using solder and heat shrink.

http://www.dsmtuners.com/forums/art...w-remove-replace-pins-harness-connectors.html

http://www.dsmtuners.com/forums/articles-tuning-ecu/246467-how-identify-ecu-pin-numbers.html

Hopefully, Calan got this figured out a couple of years ago

 

[Calan]

yeah... this and a few other things