Dual piston brake rebuild

[T is for TURBO]

Okay, how the hell do I get the second piston out? I used compressed air and the first one popped out like a rocket ship, but now I can't get the second one out. I tried blocking it off with a piece of .25" flat stock. but I can't get a good seal around it. Any helpful hints would be much appreciated!

Thanks,

Shawn

*RESOLVED*


Nevermind... I just tore out the boot on the piston that popped out, reinserted the piston, and clamped it down with a vise grip, applied air and watched it shoot across the room.. oops

 

[dented_coffee]

Nice. I always took a peice of 3/4 inch thick wood and put compressed air into it and they both come out they I just finish it off by taking the wood out and compressed air again. Shure beats busting the window out of a bently like my uncle did.

 

[T is for TURBO]

Yeah, thats my plan for the other caliper. That 8 oz. steel piston at 100 psi a disaster waiting to happen.