DIY Rear Camber Kit experts

[midnightprod]

Hello Fellow DSMers, i recently bought these bolts/washers for my DIY Rear Camber kit and i'm wondering if it'll work. they seem weaker than the oem ones. i have Pro Kit/Illuminas on a 95 gsx with 17X7.5 wheels. any advice truly appreciated.

ps: anybody with same setup?, how many washers/lockwasher did you use? alignment is kind of expensive where i live. thank you


http://www.lowes.com/pd_216013-37672-883203_0_?productId=3024789&Ntt=m10-1.25&Ntk=i_products&pl=1&currentURL=/pl__0__s?newSearch=true$Ntt=m10-1.25$y=0$x=0

http://www.lowes.com/pd_63308-37672-270061_0_?productId=3058561&Ntt=3/8%20washers&Ntk=i_products&pl=1&currentURL=/pl__0__s?newSearch=true$Ntt=3/8%20washers$y=0$x=0

 

[dsmproject1]

same setup, going for alignment tomorrow. i do not have a camber kit at all i'll let you know!

 

[PieEyedPiper]

Just make sure they're long enough and of hardness 8 or harder. I went with large fender washers, they're weak but have a large surface area. I've had zero issues in like 3 years.