Dejon Tool 3in intake

[2GturboTALON]

Ok so i bought this intake pipe thinking it would fit my Evo III 16G.I did research and everyone said it wont fit my turbo. I got a really good deal so its doesn't suck so bad , but is there anyway to get it to fit on an Evo III 16G. I really like how it looks and don't want to sell it.

 

[RadDsm]

Why wouldnt it fit?

Get a reducer coupler to fit the 16G, I have the FP 4" intake on my 14B.

 

[2GturboTALON]

http://www.dsmtuners.com/forums/newbie-forum/222642-dejon-tool-intake-pipe-question.html#post1866970

 

[CanadianTSi]

Sell it and buy yourself a 4" FP Intake then you can run the 4"-2.25" FP coupler that is specifically designed to fit a 14b/16g.

 

[Boosted98gsx]

Sell it and buy yourself a 4" FP Intake then you can run the 4"-2.25" FP coupler that is specifically designed to fit a 14b/16g.

+1

Totally agreed

 

[2GturboTALON]

Ok so i did get it to work, but had to bend the wastegate nipple slightly and get a flexible hose for the bov dump tube to make it connect because it was sooo close but wouldn't work with regular hose. Also 4 in coupler is way too big for the stock maf. i read in a thread that maf was 4in. its more like 3.5-3.75. I got it all to work and will let you know how Wot with it works out.

 

[CanadianTSi]

Actually the stock MAF is 4" and the FP 4" Intake is "oval" shaped so it matches the MAF perfectly. But if you don't believe me... Forced Performance Turbochargers: FP DSM Aluminum Intake pipe

 

[2GturboTALON]

Well if thats true then ATPturbo.com can't measure because that is where i ordered my coupler from and it is about 1/4-1/2 inch too big for 2g maf.