DSM's 4 life
10+ Year Contributor
- 649
- 14
- Nov 13, 2011
-
Buffalo,
New York
If you have any questions please ask
I have: new plugs and wires and a bosh 44 with 40psi reading up front on my fuel-lab afpr
OK it seems like cylinders 2 and 4 are not firing because my exhaust manifold is getting hot on only 1 and 3 and when I turned up my fuel pressure a few psi 40-45 it started for 1 second
http://http://www.youtube.com/watch?v=-3eqE8HaCPM&feature=youtu.be
figured it out my crank sensor was on wrong.
I have: new plugs and wires and a bosh 44 with 40psi reading up front on my fuel-lab afpr
OK it seems like cylinders 2 and 4 are not firing because my exhaust manifold is getting hot on only 1 and 3 and when I turned up my fuel pressure a few psi 40-45 it started for 1 second
http://http://www.youtube.com/watch?v=-3eqE8HaCPM&feature=youtu.be
figured it out my crank sensor was on wrong.
Last edited:
