Coolant and Oil Lines

[5150]

I Just got done rebuilding my motor, i put it back in and i am now conntecting all the odds and ends. But there are a couple of coolant lines and a lines coming from the oil filter bracket that i can not remember were they go. I have a CHILTON manual but cant find a thing, so if someone could look at these and tell me were they think they connect that would be doing me a great deal thanks.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Ok and this one is a line connected by a banjo bolt, i know i took it off of the block but i can not remember were, so i put it here but for some reason i dont think this is right.

You must be logged in to view this image or video.

 

[dave99gst]

i may be able to tell if the pix fit on my screen

 

[ddavisaf]

The last picture is your water line going to your turbo. If you're running a dry housing now, loop it off. The other two pics are to big and to blurry for me to help.

 

[5150]

Sorry about that i didnt relize that they were that big.
Here they are at a smaller size.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

Ok and this one is a line connected by a banjo bolt, i know i took it off of the block but i can not remember were, so i put it here but for some reason i dont think this is right

You must be logged in to view this image or video.

 

[5150]

C'mon guys i need some help with this.

 

[5150]

please someone please help me out

 

[leet]

Closed for multiple reasons.