Check out my numbers

[CatchMe]

This is on a EVO3 16g at 20psi on 93 octane. This is with no tuning at all. I did 2 runs because we just got the dyno in and dont have the big fans for the fmic yet and the fmic was pretty heat soaked. My pocketlogger says that im still rich and im getting no knock as well. Our wideband is on the way - when it comes I hope to tune alot more out of it along with a C16 race gas map. Let me know what you think. -Z

 

[kpt4321]

For untuned, those are some decent numbers man. That's a good looking power curve.

Where in MA are you from?

 

[CatchMe]

Thanks, I hope to get a bit more out of it. Im in Plymouth, there are a bunch of DSMers down here We had a meet last friday check out the vid http://www.dsmtuners.com/forums/showthread.php?postid=914614#post914614

 

[CatchMe]

Here it is on the dyno. I have videos of the 2 runs but no where to host them - my server is acting up for some reason. After the two runs we repainted the floor -Z

 

[KPWSerpiente]

Gah, update your profile or post your mods!
I need to dyno my car bad but it won't be happening for a little bit.

-T

 

[GSntncT]

nice numbers! But good God, update man....UPDATE!!!!

 

[16g Spoolin TSi]

South Shore DSM know a couple of kids from down there hahaha Southern NH here

 

[kpt4321]

Holy crap, NH/MA people are coming out of the freaking woodwork. Why don't I know these events are happening, ya bastards?

 

[CatchMe]

I'll be sure to make the next meet a big deal maybe a fwd dyno day or something like that. I'll figure something out as soon as it starts warming up a bit. -Z

 

[CatchMe]

oh yeah and here are all of my mods:
Evo3 16g ported
Evo3 02 manifold ported
DNP tubular ex. manifold
Tial 40mm external w/g
DSS 3in. turbo back (no cat)
Greddy Big Fmic
Greddy S-Bov
Injen Intake
NGK 6's w/Magnecore wires
ACT 2600 Clutch
ACT l/w flywheel
HKS EVC 5
SAFC 2 (black)
RC 550cc injectors
Walbro 190lph fp
EGT, Boost gauges - indash pod
Tanabe Strut brace
Optima Red top bat.
Yokohama A032R Soft compound
TPM drilled/slotted rotors
Axis Brake Pads
Sportline Springs
KYB AGX Adjustable shocks
B&M Short throw w/ momo knob
Oh and clear bumper lenses

 

[GSntncT]

Originally posted by CatchMe

Oh and clear bumper lenses

Ah, so THAT'S what pushed you over 300 hp!!! J/K. Again, nice numbers.

 

[keltalon]

Originally posted by CatchMe
oh yeah and here are all of my mods:
Evo3 16g ported
Evo3 02 manifold ported
DNP tubular ex. manifold
Tial 40mm external w/g
DSS 3in. turbo back (no cat)
Greddy Big Fmic
Greddy S-Bov
Injen Intake
NGK 6's w/Magnecore wires
ACT 2600 Clutch
ACT l/w flywheel
HKS EVC 5
SAFC 2 (black)
RC 550cc injectors
Walbro 190lph fp
EGT, Boost gauges - indash pod
Tanabe Strut brace
Optima Red top bat.
Yokohama A032R Soft compound
TPM drilled/slotted rotors
Axis Brake Pads
Sportline Springs
KYB AGX Adjustable shocks
B&M Short throw w/ momo knob
Oh and clear bumper lenses

is this with the stock cams or hks?

 

[keltalon]

Originally posted by CatchMe
oh yeah and here are all of my mods:
Evo3 16g ported
Evo3 02 manifold ported
DNP tubular ex. manifold
Tial 40mm external w/g
DSS 3in. turbo back (no cat)
Greddy Big Fmic
Greddy S-Bov
Injen Intake
NGK 6's w/Magnecore wires
ACT 2600 Clutch
ACT l/w flywheel
HKS EVC 5
SAFC 2 (black)
RC 550cc injectors
Walbro 190lph fp
EGT, Boost gauges - indash pod
Tanabe Strut brace
Optima Red top bat.
Yokohama A032R Soft compound
TPM drilled/slotted rotors
Axis Brake Pads
Sportline Springs
KYB AGX Adjustable shocks
B&M Short throw w/ momo knob
Oh and clear bumper lenses

 

[CatchMe]

Stock cams - eh, meltdown?

 

[keltalon]

Originally posted by CatchMe
Stock cams - eh, meltdown?

meltdown typo error. i was trying to type meltdown in the search column but forgot i was still in the reply section sorry for error. but if you know anything about piston meltdown i just melted #2 and#3 i am pulling my engine this weekend to replace with another: