The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2G Car Idles Fine but Won't Rev

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jim97gst

20+ Year Contributor
482
3
Aug 2, 2002
Bethel Park, Pennsylvania
I had a really strange problem today with my 97 gst. I had just driven it about 12 miles with no issues and then it sat for about 20 minutes. I took it out and almost immediately it would barely rev. It idled just fine. I was only a few hundred feet from my house. I was barely able to get it back in the garage. I had to give it lots of gas. It stalled a few times. It acted a lot like it has when an intercooler pipe coupling blows off. I checked all of the pipes and they seemed fine. That cause seems very unlikely as that has only happened when I've gone full throttle which I hadn't. A few hours later I started it up to try and figure out what was going on and it was just fine. I took it for a short ride with no issues. I have not done a vacuum leak test yet. Any ideas? My first thought was maybe a flaky BOV that was stuck open. I have a Forge.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

  • For sale 2g Early 95 2GA DSM Hardtop for sale (5-speed)
    2G DSM for sale
    • codexes21
    • Updated:
    • Expires
  • For sale 4G63 7 Bolt Oil Filter Housing
    7 Bolt Oil Filter Housing $50 + shipping & paypal feesYou must be registered to see...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 2g WTB 2g GSX rack lines.
    Looking for the line pictured that goes from one side of the rack to the other. Just need one...
    • jakk220
    • Updated:
    • Expires
  • Wanted 1g 92-94 Hood Needed
    Looking for 92-94 1G 2.0 DSM hood to replace mine that is dented and in need of replacement...
    • JLavetsky
    • Updated:
    • Expires
  • For sale 4G63 Tomei 280/280 Solid Lifter Camshaft
    Bought these for my 6-Bolt CNC ported head that was sold not too long ago, and already have...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top