The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Car doesn't seem to pull as strong as it's supposed to from time to time?!?!help wtf?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TracOwner

15+ Year Contributor
291
5
Mar 27, 2005
Denver, Colorado
Ok, this happens fom time to time (mostly after I have been driving the car for around 30 mins or so). The car doesn't seem to pull as strong as it is supposed to. The turbo spools up and everything but the car doesn't seem to pull as strong as usual. Anybody know what the problem is? Heat soak perhaps? Is there anything I can do to solve this problem?

The car is completly stock, running 15psi. :dsm:
 
Try cleaning you intercooler, you may have a bunch of build up stuck in it causing poor air flow & poor cooling.
 
You have a complete stock 2g. Thats your problem. There is no way you run 15 psi stock. Our plastic BOV's leak at like 13 psi. I am stock also and i hit 13 then drop to 12. But yes cleaning out the intercooler can always help especially if it has never been cleaned. What kind of temperatures are you seeing there?
 
In another post kinda like this one. Some one not sure who (sorry for not giving credit) said that switching to a supra side intercooler should help with heatsoak problem. I would start with cleaning it first. Thats my plan for this weekend. To take off all of my piping and clean it all out. :dsm:
 
heatsoaking of the stock smic is your problem. Try touching your uicp after driving for 30 mins, bet its hella hot :notgood:
 
k, I'll clean the intercooler. I hope that's a temporary solution until I switch to a fmic.
What liquid should I use? Water, gasoline?

asexton6969 said:
There is no way you run 15 psi stock. Our plastic BOV's leak at like 13 psi. I am stock also and i hit 13 then drop to 12. But yes cleaning out the intercooler can always help especially if it has never been cleaned.
My bov doesn't seem to leak at all. My boost gauge is showing 15psi and that's how it stays throughout the rpm range once the turbo kicks in. :dsm:
 
Use Fuel. Supra SMIC's are nice. I'm getting mine in on Tuesday. Also, BOV's leak on a car to car basis. Mine doesn't but my friend's does at 13 psi. I run 15, rather I ran 15. Anywho....

Upgrade to a Supra SMIC, it's 150 bucks shipped and the IC is capable of supporting 550 whp on a Supra.... OBVIOUSLY it'll be a drastic increase for us. Upgrade the pipes also. Those pesky stock pipes are full of restriction....
 
I might do that. But, where can I get a supra smic from?
 
Check eBay or the Classifieds. Make sure its's from an MKIV Supra. I think the IIIs used a front mount. Besides flipping the end tanks, it's just about a bolt-on affair with a 2g.
 
So there isn't a specific site selling these things? The ones on ebay look bend and rusty.
 
What's the procedure for cleaning the intercooler with fuel ? I've been meaning to do it because I have the same heat soak problem.
 
Liquidus said:
What's the procedure for cleaning the intercooler with fuel ? I've been meaning to do it because I have the same heat soak problem.


take it off the car, cap one end with your hand. Pour fuel into the other end and then cap that side with other hand. Shake intercooler so fuel splashes around inside. pour gas out and repeat untill the gas comes out clear and not black.
 
Going in to another direction with this post. Could it be your clutch slipping a little bit. This could cause the car to still reach full boost as mentioned, but feel as if its pulling a lot weaker.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top