The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Can i run a big 16g safely.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chipper308

Proven Member
178
0
Dec 10, 2012
Bay City, Michigan
found an evo III big 16g not ebay. can som1 tell me if i can buy this and slap it on my car at stock psi safely without seeing tons of fuel cut etc etc. saving up for link but im not there yet. i have an smic and the piping for a 16g/14b setup going to the smic. will the turbo just bolt up and replace the stock system at this point? minus the piping.
 
I am currently running a 16g turbo and a wally 255 and stock injectors with stock fpr. I run 12-15 psi and my car never hits fuel cut. I also have all stock internals. I'm about to get my wideband all hooked up and put 3" gm maf and translater on my car so i can actually kinda tune it.
 
The only issue I've had running an EVO III 16g is with my stock injectors. I ran the 16g with 650cc injectors, a 255 fuel pump, and a stock fpr and was fine at 22 psi (I was running dsm link, a boost controller, and a wideband also). With the 450's, I could only go up to about 15 psi.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top