Camber Problem

[Jslove1408]

I really need some help. I installed my Ingals 3º correction kit and adjusted it to have as much positive camber as it could give me. But I am still get alot of wear on the inside of my tires. Just by eye balling it, it looks like it has to much positive camber but I am still getting inside tire wear please someone help I cant let these new tires go to $h**. any ideas?

~Josh

 

[No_Skillz]

Get an alignment, dude.

 

[Jslove1408]

To get an alignment would it matter if I needed a new hub assembly?

 

[EclipseTrbo420A]

To get an alignment would it matter if I needed a new hub assembly?

If you hub is bad get that replaced first THEN get the alignment. Good luck

 

[mrbrianf20]

hey i just got a gsx and its got a camber prolem. the mechanic said that the ball ball joints had a 16th of an inch gap. so id get that checked out. just get an alignment but keep in mind that it could be the ball joints.

 

[No_Skillz]

Either way, replace any suspension parts first. Alignment is always last.

 

[Jslove1408]

Thanks I will definitly do that