auto to man. wire conections

[lowboost13]

Hey guys, I did an auto to man. trans swap and was wondering what wires I use off of the auto tranny harness for the reverse lights, and what should I do with the extra wires? Also I wanted to wire in my clutch pedal to use the ecmlink, but I cant seem to find out what wires to use. I found an open floating wire, but its not the same connector as the one on the clutch. My car is a 1g awd turbo talon.

 

[19Eclipse90]

Hey guys, I did an auto to man. trans swap and was wondering what wires I use off of the auto tranny harness for the reverse lights, and what should I do with the extra wires?

http://www.dsmtuners.com/forums/newbie-forum/431046-reverse-light-connector-question.html
http://www.dsmtuners.com/forums/electrical-tech/408521-what-what-does-do.html
http://www.dsmtuners.com/forums/newbie-forum/340243-resolved-another-problem-dizzum.html#post151904881

Also I wanted to wire in my clutch pedal to use the ecmlink, but I cant seem to find out what wires to use. I found an open floating wire, but its not the same connector as the one on the clutch. My car is a 1g awd turbo talon.

I have no idea what you are talking about here. What do you want to use the clutch pedal wires for?

 

[lowboost13]

I read somewhere on here that you need the clutch wired in to use ecmlink, or is that wrong?

 

[19Eclipse90]

I don't know much of anything about ECMLink but the only thing I find using the clutch pedal switch wires is for NLTS functionality which is not a requirement -- and that's using the cruise-control deactivation switch rather than the starter circuit switch.

clutchcutwire [ECMTuning - wiki]
http://www.ecmtuning.com/downloads/docs/1G%20Clutch%20Wire%20Instructions.pdf

Maybe one of the Link professionals will stop by and educate us both.

 

[lowboost13]

Ok thanks for all the help!