Are there any 16G install kits without a J-pipe?

[streetdsmpwr]

Does anyone know if there are any kits out there to install a 16G on a 2G without the J-pipe, I already have one. If there isn't a kit, where is the cheapest place to go to get the oil feed/return lines, gaskets, washers, and water lines separately?

 

[onelowgst98]

Extremepsi.com

 

[streetdsmpwr]

Extremepsi is probably where I'll end up going if I can't find anything better.

 

[knochgoon24]

You can reuse your coolant lines and oil return line. If you have a j-pipe, all you need is the oil feed and the 2 banjo bolts.
You can get the gaskets and crush washers from most of the vendors. I actually went to Harbor Freight and bought a copper washer set. It's advertised for use in electrical connections, but they crush just fine for coolant and oil lines.

The coolant lines can be swapped front to back and re used. You will just have to bend them a little. Just 2 short lengths of new rubber coolant line will be needed. It's cheap from your local auto parts store.

The 2g oil return line needs slotted to fit the 1g turbo bolt pattern. A carbide bit and Dremel work great.

 

[GsXtC21]

Seriously just piece your own kit, you quality oem stuff and you'll save yourself about $100 versus going with the kit from extreme....

 

[BLINKY619]

and you'll know what you've done to the car...! i love making my own custom parts...! if you do it right you wont be disappointed...! take your time...!

 

[knochgoon24]

This shows what I meant about the water lines.
EVO 16G Install on a 2G Page 2

 

[streetdsmpwr]

Yeah, I'll probably just get the parts I need from extremepsi. Should I get this for my oil feed line?

EXTREME PSI : Your #1 Source for In Stock Performance Parts - Oil Feedline Kit (Oil Filter Location): Mitsubishi Eclipse 90-99

 

[knochgoon24]

How much boost are you going to run and do you still have your balance shafts?

 

[streetdsmpwr]

Still have balance shafts and its my daily driver so I'll probably set the boost to a max of 20-22 on the strip.