Anyone make a FMIC kit setup for blow-thru MAFT setup

[sergiosdsm]

i am currently in the market for a fmic kit and i am wondering if any of the companies that make intercooler kits , would accomodate the blow thru gm maft setup that i have on my car, i searched but could not come up with any results

 

[nukefission]

I'm sure it wouldn't be too much hassle to ask them to cut out a section of pipe to accomodate the MAF. Ideally it would be a straight portion of the upper intercooler pipe.

Here's how I did it:

You must be logged in to view this image or video.

 

[IMMORTALSPYDER]

Ask dejon tool. They make fmic kits with maft setups so they may work with you.

 

[RACER-X]

yes, dejon tool makes one. i was looking at them today, on line.

 

[Got Grip]

Pro Street cut my UICP for a MAFT when I ordered their 2G Race Core.

I just had to order some silicone couplers from RRE to fit the 3" MAF, it worked out nicely.

Off the car:
http://people.clemson.edu/~nanthon/ic/

Installing:
http://people.clemson.edu/~nanthon/icinstall/

Finished:
http://people.clemson.edu/~nanthon/gsx/images/DSCF0242.JPG

PS. The stock MAF is in there still for tuning purposes.

 

[ITSME4G63]

Originally posted by nukefission
I'm sure it wouldn't be too much hassle to ask them to cut out a section of pipe to accomodate the MAF. Ideally it would be a straight portion of the upper intercooler pipe.

Here's how I did it:

You must be logged in to view this image or video.

why in the #### do you have 2 bov's?

 

[greenmachine97]

Originally posted by ITSME4G63
why in the #### do you have 2 bov's?

yea, me too! i have seen this before on other cars, but i never knew why!

 

[nukefission]

It's the poor man's solution for better flow. I wasn't sure 1 stock BOV would be enough to vent the volume of air generated by the turbo, so I put two on there. I've seen it done before. Both are modded with Dejon Tool's pressure switch. I was running one before, also modded the same way, and it didn't leak when pressure tested to 25 psi.

The sound does happen to be pretty neat, but that was a by-product.

 

[Blk95gs]

I use the Dejon Tool race FMIC kit and it does come with the setup with the MAF in a blow-thru setup. But it requires cutting the core support, you can't use the bumper, and not everyone wants a 28"x11"x3.5" intercooler. It's a good deal for the money though, if that's the route you so desire.

 

[al5dsm]

Im using an APEX'i core and LICP with my blow-through MAFT setup

 

[sergiosdsm]

thanks for all of the input guys , i appreciate it , now comes the hard part , shelling out the money