Anyone from Winnipeg around here or close?

[curt-s]

2G front lower balljoints were notorious for failing. 1G you should be ok.
i have been on a mevotech with a collapsed destroyed boot for almost 20k, finally replacing this year.. but those 2Gs blew up if you looked at em funny

 

[BlkSmk]

The transmission was acting up before this.

Since I'm on the road cars going into a shop to get repaired and then off to gw

 

[Kai Hefner]

Can't say I'm from the peg but around Canada is kinda close no?

Any of y'all selling Link v3? Searching everywhere for it.

 

[BlkSmk]

Gw transmission should have my car by July 1st!!!! Should be done by the 21st and then time to bolt in the 20g and hit 24 psi

 

[o0GuitarKid0o]

Gw transmission should have my car by July 1st!!!! Should be done by the 21st and then time to bolt in the 20g and hit 24 psi

Right on! Hope to see you out on cruise nights!

 

[curt-s]

Will try not to window my block before then...

 

[BlkSmk]

I know after the transmission is done I'm off to saskatoon for a weekend that's where the upgrade is going to happen. Bye bye 10 psi on baby 13g turbo hello 24 on 20g .

Anyone up for coffee and a meet in greet sometime in the next 2 months?

 

[curt-s]

Yeah sure.
So 255 pump, injectors, and a 20g.
Whats your full mod list?

 

[BlkSmk]

Here's the model list.
20g, 750 cc injectors, 255, link, 3 inch full exhaust, huge fmic hard piped, apr headstuds. Brandon has run this setup a few times on other cars. 438 hp on link . If my memory is correct.

Just got a spare transmission with tcase
New front end axles aframe on the way.
New rear hub and bearings .

Car should be on the road June 15th

 

[curt-s]

ehhhh link estimates.. or do you mean actual dyno numbers.


over 430bhp on 750cc injectors is stretching them a bit but no 850 or 950?
winnipeg gas is shit too, if you havent discovered that yet. husky 94 is very hit and miss for pushing turbos and anything more than 22psi and youre looking at very conservative timing or meth. the most consistent i have found is the one on Plessis.
shell 91 just couldnt get me over 20 even on 7.8:1 and 8 degrees at peak torque.

im starting my tune from scratch this year. maybe i will even pick up a LSU 4.9 sensor for the ol mtxl. i am looking for a consistent 22-23psi out of this 16g. i feel like i am holding it back at 20.
just have to find the time between renos, prepping the house for sale, work, and sleep.

 

[BlkSmk]

Curt. Yeah link is guessing on his last setup 438 but that was with cams and a fully built 2.0.. I'm not completely built.

My car is mostly in Portage so far I'm using shell 91. I'm not a fan of husky in any of my boosted vehicles.

I think my dtc is 95% if I remember brandon correctly..

In all honestly once it's done I might sell it . I'm seriously considering a motorhome or pickup/5th wheel... living in the semi isn't that great and well honestly I dont get to enjoy the car since I'm always on the road. So getting a place of my own is tempting.... but who knows I'm frustrated with the car. But its dsm life

 

[curt-s]

never means you cant move to something else in the future. just keep me in mind because i would like to own a 2g before i die

 

[BlkSmk]

Well once she is put together. I'll be tempted to give her to a good home and I'm sure we can figure out a reasonable solution

I love my cars. It's just my future is on a few different paths. Then most.

never means you cant move to something else in the future. just keep me in mind because i would like to own a 2g before i die

 

[o0GuitarKid0o]

Soooooo how bout them jets

 

[curt-s]

As expected this season/post.

 

[o0GuitarKid0o]

As expected this season/post.

Yep see what happends Saturday they went down hill in the new year

 

[BlkSmk]

Got the parts 20 g turbo 750 cc injectors 255 fuel pump and link with cable

 

[BlkSmk]

I paid 2500 for the car Turbo injectors fuel pump dsmlink 2500 New rear hub and bearings 5inch intake filter maf adapter new rear hatch struts New 52mm. AEM X-Series AFR, Boost, Oil Pressure. 900 I'm more then willing to negotiate a fair price. Due to it needs work Would be using this money for my down payment on my semi I'm looking at financing

 

[Gunslinger34]

Boys, any ideas where to pick up an Evo 3 16g or any other bolt on turbo? Used preferably.

Also having a hell of a hard time trying to find high rise spoiler and 2gb side skirts

 

[BLACK'98DSM]

Boys, any ideas where to pick up an Evo 3 16g or any other bolt on turbo? Used preferably.

Also having a hell of a hard time trying to find high rise spoiler and 2gb side skirts

https://www.carid.com/1998-mitsubis...2267.html?parentsubmodel[]=SUBMODEL|Hatchback

https://www.carid.com/duraflex/b-2-...pn-101594.html?singleid=901801279&url=1299933

Sorry if these don't ship to Canada, I was just assuming.

 

[curt-s]

Boys, any ideas where to pick up an Evo 3 16g or any other bolt on turbo? Used preferably.

Also having a hell of a hard time trying to find high rise spoiler and 2gb side skirts

I have not seen anything besides a 14b every now and then in this city. Sometimes a China knockoff 16g but for the love of everything that matters stay away from that godspeed trash or anything that has "TURBOCHARGER" engraved on it.

there was a white 2g that was on kijiji a bit ago that sold and now seems to be again by its new owner for what I think is an inflated price..they may be willing to do something.

 

[o0GuitarKid0o]

Boys, any ideas where to pick up an Evo 3 16g or any other bolt on turbo? Used preferably.

Also having a hell of a hard time trying to find high rise spoiler and 2gb side skirts

I have a China bay 16g

 

[BlkSmk]

All my front end parts arrived!!!!

Time to put her on all 4s again.

Then gw transmissions to get the transmission rebuilt and then 20g goodies hopefully by July.

 

[Gunslinger34]

Where does.one find a.20g?

 

[BlkSmk]

I got all my parts from my friend who has multi parts. Names pimpy_rider on the forum