aluminium COP plate for vag coils

[shadxm]

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[GSR-VR]

I'm guessing since you're in Europe, Audi COP are very easy to come across and much more easily had rather than GM Coils or Hayabusa coils. I also wanted to add the welds are also very nice. Excellent piece. What else have you made?

 

[shadxm]

I am from Russia, not Europe)) I can't choose Russia in profile.
But you are right, price for VAG cop from junkyard here about $10-$15, so this is my choice.
This plate was welded by my friend, not me.

 

[Priority DSM]

Very nice fab. I like it. I also want it

 

[GSR-VR]

Did you cut out the plate that holds the COP?

 

[shadxm]

yes. details were lasercut separate and then welded together.

You must be logged in to view this image or video.

 

[shadxm]

some other parts:

holset hx40 cold outlet flange (for weld), from local workshop + v-band from subaru TF035 turbo (dia 73.0mm) + O-ring from unknown waterpump)

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[TSiAWD666]

What's driving the coils? What's the dwell map?

 

[shadxm]

bosch 0227100211 ignition module, http://www.motec.com/filedownload.php/m37.pdf?docid=1267
dwell is calculated using an oscilloscope.

 

[TSiAWD666]

What ecu then?

 

[shadxm]

evo8

 

[Gamble97]

hey that's some good work!