Air Fuel Gauge... Which O2 wire?

[copper_gst]

I am asking just what the topic title says. Which O2 wire do you hook the air fuel gauge to? I just go my guage and started to wire it in. I got the power, ground, and ignistion wires figured out but when I went to do the O2 wire I have no idea which one to go to. I have a 95 gst so it is a four wire O2 setup. So which color of wire is it? Thanks for your help.

 

[dave99gst]

http://vfaq.com/mods/ecu-harness-2G.html
http://www.turboeclipse.com/2gecu.jpg
pin 76

 

[chicagoavenger]

http://vfaq.com/mods/wayback/BradBauer/electrical/find-o2.html

AHH BEAT ME TO IT BY 30 SECS!!!!

 

[copper_gst]

Can you guys explain to me what I am looking at with these links.

 

[grnchevyz]

Follow dave99gst's first link.

It shows you the connectors on your ECU (located behind the center console where the radio is).

Remove the top connector and locate pin 76 as he mentioned (that's the 6th on on the left row from the top.)

Splice on that wire. Make sure you solder your connection properly to ensure an accurate reading.

 

[copper_gst]

Thank guys. I will try that.

 

[nightspeed87]

on my 1g i wired it in under the hood at the actually o2 connection harness , ive read something about it being more accurate the closer you put it to the actual sensor, it was a white wire i believe that i tapped into right at the base after the sensor. I dont know if 2gs are different though.