A couple setup/tuning questions

[mchustle]

Hi first let me start off by saying to the mods I know it says don't post in newbs because it's busy but I think I've still got newb questions. If you feel it should be moved by all means please do.

Ok now I've decided since I have a EPROM ecu already and it's socketed I'm going to start off tuning with tunerpro and a chip burner. So I'm just wondering if anyone knows some good reading for this I don't really know anything about tuning and everything I seem to find is about link. My plans are to get some chips, easy burn 2 or whatever it is from moates.net, a cheap logger cable from eBay, and tunerpro. Also plan on getting a wideband. Do you all think I need anything else? What's a good starting point in tunerpro?

Setup is 95 gst with 6bolt block 7bolt head, stock rewire pump, afpr, pr fmic, 16g, mbc, boost and oil psi gauges. Looking for some evo injectors right now, 560cc I'm pretty sure very well could be wrong going from memory which is horrible.

So if anyone has any input on the setup or "tuning setup" please let me know any input is appreciated. Amd before everyone says it link is out of the question for now because I can't afford it for awhile. I'm hoping to get a safe 18psi tune for now using this setup which seems very possible with this setup. Thanks in advance for any input.

 

[Boostnvegas]

Honestly since you have an EPROM already, I'd go dsm link. It's the best bang for the buck especially if you are running a EPROM ecu already.

 

[mchustle]

Honestly since you have an EPROM already, I'd go dsm link. It's the best bang for the buck especially if you are running a EPROM ecu already.

Yea but I can get the chip burner, chips, and the program for around $100 that's a lot cheaper than link, don't get me wrong it's probably less hassle but just can't afford it right now. Thanks for the input though.