M1L3S
10+ Year Contributor
- 132
- 1
- Apr 1, 2012
-
maple grove,
Minnesota
So last year I spun a bearing
So this summer installed walbro 255
Fuel lab fpr(stuck at 20?)
Cyclone mani
My boost gauge reads -8 psi at Iidle (supposed to be -18 right?) [No boost leaks]
Im tuning with a 99 flashable ecu.
My question is,because I swapped so much can my tune be off that bad that its over running my fuel sending unit causing me to leak gas out of the vent tube ?
Also im on the corn(e85)
My wide band reads anywherr between 17-18
Breaks up under boost horribly.
So this summer installed walbro 255
Fuel lab fpr(stuck at 20?)
Cyclone mani
My boost gauge reads -8 psi at Iidle (supposed to be -18 right?) [No boost leaks]
Im tuning with a 99 flashable ecu.
My question is,because I swapped so much can my tune be off that bad that its over running my fuel sending unit causing me to leak gas out of the vent tube ?
Also im on the corn(e85)
My wide band reads anywherr between 17-18
Breaks up under boost horribly.