The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

90 Gauge cluster not working (I searched)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

93_tsi_fwd

15+ Year Contributor
2,624
17
Dec 20, 2006
San Jose, California
Okay, I searched through the 7 pages of "cluster not working" results.

I just bought a 90 eclipse GST, It was knocking cause the timing jumped 5, 6 teeth. Got that fixed.

The only thing left for me to fix is the gauge cluster. The RPM, GAS, TEMP, OiL PRESSURE, and all the lights on the bottom are not working at all. Ive checked all fuses, relays, changed the actual cluster it self(from my 93) and still nothing. It had an aftermarket alarm but I took out everything and connected every single wire that has been spliced/cut.Even when the alarm was still in there, it wasnt working.

Any help would be great.
 
The dimmer switch is working. The back light for the gauges lite up once the headlights are turned on. Its the gauges that doent work and all the warning lights. (check engine, coolant, oil, brake, high light, battery...)
 
Anyone?

i got another 90 cluster from the junk yard and it still wont work. ive checked all fuses and all wiring harness. i even took out the dash board to replace the clutch pedal assembly, put everything back and still nothing.

anyone got an idea?
 
yes, i checked all fuses inside and the outside. even changed the dimmer switch.

only thing i can think of left is the alternator cause it dies when i remove the baterry.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top