660 Greddy injector

[mattp_65]

I was wondering if anyone knows where I can get one 660 greddyinjector for cheap, because I keep getting a misfire in my #2 cylinder. I switch injectors 2 and 4 so I can narrow down the misfire and it is my injector. I tried cleaning it with plymouthlaser.com strategy and using fuel injector cleaner and nothing works and I tested it and it is around 2-3 ohms where it should be. So can you guys help me, I am tired of seeing my CEL come on. Also I changed o-rings and lower insulators.
Thanks
Matt

 

[ericbev]

http://www.prostreetonline.com/buy/greddy_fuel_injectors/13500066/ but they sure aerent cheap. I checked ebay and there were none on there. Not too many people run these (with their price I can understand why) so I doubt you will find any.

You can find a whole set of used FIC/PTE units for almost the price of one new greddy unit. Check out the classifieds.

Oh and just because the resistance is in spec doesnt explain the whole story. If you said the misfire code followed the injector, then you are on the right track.

You could send it to RC to clean/balance/calibrate/test it and see what they say. Its $30 with a 3 day turnaround time. It might be worth it if you are on a tight budget.

 

[RedTurboEclipse]

I hope your not looking specifically for "Greddy" brand injectors. Those "Greddy" injectors are Denso 660s with the box/packaging labled Greddy with their part number and an increase of price.

Look for a single Denso 660 injector, same thing.

 

[mattp_65]

I hope your not looking specifically for "Greddy" brand injectors. Those "Greddy" injectors are Denso 660s with the box/packaging labled Greddy with their part number and an increase of price.

Look for a single Denso 660 injector, same thing.

I knew that they are Denso 660 all I need is one injector and it is a PITA to look for one. For a cheap 660 injector all cost about 120-150 dollars and that is expensive.

 

[ericbev]

I hope your not looking specifically for "Greddy" brand injectors. Those "Greddy" injectors are Denso 660s with the box/packaging labled Greddy with their part number and an increase of price.

Look for a single Denso 660 injector, same thing.

Thats what I thought but I wasnt sure. That is some ruthless markup they put on those things.

Either way I cant seem to find a single 660cc injector for sale anywhere, let alone a specific brand.

 

[ilikespeeding]

It was 125 for two GReddy Injectors.

 

[mattp_65]

It was 125 for two GReddy Injectors.

Are you sure two 660 Denso injectors for $125? I can only find one 660 injector, the cheapest $115. I need one for cheap used or new can anyone help?

 

[ilikespeeding]

Are you sure two 660 Denso injectors for $125? I can only find one 660 injector, the cheapest $115. I need one for cheap used or new can anyone help?

While I cant promise that its two injectors...they do say:

"HIGH FLOW FUEL INJECTORS - 660cc - 2- 3ohm"
"13500066: Greddy Fuel Injectors "

The picture had two and usually if it did and they were only gonna ship one, they'd say so somewhere.

 

[mattp_65]

Any other places for a single 660 Denso/greddy injector? I am still looking for one.
thanks
matt