-6 AN Fuel Send/Return Lines

[Moonlight GSX]

I've read on different fuel systems... but my question is length between the fuel rail and tank on both ends - send and return (through fuel filter and regulator). I'm thinking of rocking -6 AN fuel lines but to use the Russell ProClassic braided lines that shouldn't be as heavy/painful as the SS (just more expensive). I just need to know the length of the full system. Thanks guys.

 

[99gst_racer]

It's roughly 10-12 ft per line depending on how it's routed.

 

[agentorange313]

To prevent the problem of having the smell of gas emanating from your car, I would look into Nylon enforced braided hosing, Or at least for the 10-12 foot line running under your car.

 

[Moonlight GSX]

It's roughly 10-12 ft per line depending on how it's routed.

Do you have any recommendations as to where to route it? I saw yours, sort of, and it kinda makes sense. Although, I didn't see the remaining bits.

 

[Josh_92DSM]

I don't know if you've seen this kit but it's through STM and it's a fuel tank to rail kit comes with everything you need to replace the line with -6AN
STM | 90-99 DSM FUEL TANK TO RAIL KIT
Like I said I don't know if you've seen it just throwin it out there

 

[99gst_racer]

Do you have any recommendations as to where to route it? I saw yours, sort of, and it kinda makes sense. Although, I didn't see the remaining bits.

I like where mine is routed and I really can't think of a better route.