330 AWHP Sound about right?

[SpeedyDSM]

Well as I currently have not done a Dyno run yet I was wondering since you guys are more expiernced then I am if you guys could guesstimate as to how much awhp or crank hp I have right now with my current mods.

1G 2.0L bore .020
Scat rods
Ross pistons 8:3:1 CR
BC 272 Cams
1G Head ported polished and Valve job
BC retainers/springs
ETS FMIC 3" piping
3" turbo back exhaust
Evo III 16G turbo 15 PSI current;y
DSMlink
Running on 92 Pump

I'm guessing anywhere from 300-330 AWHP would sound about right to me but I could be way off IDK.
And What could I safely turn the PSI up to on the turbo?

Thanks Seth

 

[LiquidX]

NO bench racing allowed.

As for you psi question, that's all fuel related which you don't have listed, so no more then 15psi MAX

 

[MrBoxx]

We have no way of knowing what is "safe" for your engine. Only your datalogger can give you that information.

We also have no way of knowing how much power X, Y, and Z modifications will make on your car. All we can do is guess and that just ends up starting fights and flamewars. Take your car to a dyno and hope for the best. Let us know how you do.

 

[jrohner]

If you're tune is half decent, you can just go by lbs/min of airflow to get a decent idea of hp. Take lbs/min * about 10 or 10.5 with good fuel.

I highly doubt you'd get 330awhp at 15psi though.