2ga to 2gb spoiler

[lucid15]

So i want to do the conversion from 2ga to 2gb type spoiler... what do i all need and what do i need to do? Here is a pic now:

You must be logged in to view this image or video.

 

[SnprSlick]

you'de have to remove the old one, weld the old holes shut. sand it down, primer and repaint. and drill the new holes and mount.

 

[zhjiln]

you should probably go ahead and get the 2gb rear bumper as well ....

 

[95blackGsTurbo]

I would go wingless personally. Here is some info on doing the conversion.
http://www.dsmtuners.com/forums/app...p-filling-old-spoiler-holes-merged-9-6-a.html
http://www.dsmtuners.com/forums/hangout/156091-turbo-spoiler-merged-8-8-a.html

 

[srtcrazy]

Or just get the hatch from a 97-99 Eclipse. That's what I did.

 

[dannyd97gst]

I would go wingless personally. Here is some info on doing the conversion.
http://www.dsmtuners.com/forums/app...p-filling-old-spoiler-holes-merged-9-6-a.html
http://www.dsmtuners.com/forums/hangout/156091-turbo-spoiler-merged-8-8-a.html

PLUS 1 on the wingless, I hate my high wing...just too many holes to plug on a weekend.

 

[clean96GST]

you should probably go ahead and get the 2gb rear bumper as well ....

Good luck finding one

 

[ArmDSM]

So i want to do the conversion from 2ga to 2gb type spoiler... what do i all need and what do i need to do? Here is a pic now:

You must be logged in to view this image or video.

Did you end up doing it? Just got a 2ga 95 gst, thinking about doing the same thing.

 

[IHeartMyHonda]

Did you end up doing it? Just got a 2ga 95 gst, thinking about doing the same thing.

Buddy, that was 16 years ago. Tons of people have changed their spoilers.

 

[jesse12345]

Very old post but if your going to do it fiber glass under the holes and bondo the top to avoid warping the metal. You will find so many posts on how to do the swap. You'll even find videos on YouTube what people have done.