Resolved 2G Window rattle (Solved)

[MasterMatt209]

The gold piece shown in the picture seems a little loose and causing my window rattle problem, it’s not horrible but I’d like it to be solid. There’s only one nut on top that I tightened but still seems loose on the bottom, any help? Where you see the white plastic in the picture that is on the gold piece, that is what has play.

 

[AWD-Tony]

There’s no picture. How’s she idling?

 

[MasterMatt209]

You must be logged in to view this image or video.

Here’s the picture sorry, this so for my Talon she’s perfect. Getting around to the Eclipse later today. Also figured out I could take this piece out and clamp it so it was tight. So much better the door doesn’t sound like my glass is about to break anymore haha. Hopefully this helps someone. Just take off the 10mm bolt and slid the piece off. Put it in a vice and make the plastic pieces closer together.

 

[AWD-Tony]

Glad you figured it out. 2g problems haha. I remember mine did the same thing but it was just loose regulator bolts.

 

[bduran1220]

Damn Imma pop mine open in bit to check this out

 

[MasterMatt209]

Damn Imma pop mine open in bit to check this out

Do it, also tighten the regulator nols if you need to like tk106 said. Also before finding that problem one of the bolts that holds the window to the up and down arm things came off I felt around the bottom of the door and found the hardware and put it back on. So much better now!

 

[bduran1220]

I thought the window rattle was a 2g problem that couldn't be fixed...then again I never really tried to fix it

 

[jperks911]

this is a old thread, but still a great help in 2025. So tired of the window/ door noise

 

[curt-s]

Didn't do anything for me but I suspect my issue is larger than that.