2g AWD Rear Brake Parts

[Grimis]

I have mitsu caps program but when looking for he rear brake part numbers, i dont get the caliper, caliper braket etc, just the ebrake pad numbers and such. I need the numbers (for both sides when applicable) Locking/Guide bolts (L/G bolts) the bolts for the caliper braket, and the calipers. Its a 95 AWD Talon. If any one can point me in the right direction to grab these numbers, that would be great. A Pre-Thanks

 

[snowborder714]

When in CAPS, the BIG arrows under the Help drop down menu (the same bar with Zoom, Retrieve, and Illustration) move between the different pages. The first page is the E-brake stuff as you said. The second page has the caliper info.

These are the part numbers I get:

Lock pin - MB857234
Little thing on end of lock pin - MB699587
Guide pin - MB857233
Bracket bolt - MB316086
Bracket bolt washer - MS450043

And as far as I see, you can't purchase the caliper and bracket seperately but they sell a caliper kit that includes caliper, bracket, lock/guide pins, bracket bolts, etc.

PNC number 52008L (which I'm guessing is the left rear caliper kit) - MR129583
PNC number 52008R (which I'm guessing is the right rear caliper kit) - MR129584


Or you can just go to your local auto store (Advance, Auto Zone, NAPA) and get everything from them. Some places even have warranties (some lifetime, some not) on the calipers.

But from now on, if you don't see something in CAPS, use the BIG arrows at the top. I found that out one day and it opened up a lot of pages which I had been looking for stuff on them but couldn't find it!

 

[Defiant]

Make sure you don't have an early 95 with the Stealth rears. They're vented discs.

 

[Grimis]

thanks Snowborder714, I did not know that!! Now that i know that, makes life a bit easer.


Defiant - As from what i can tell, besides my car being a 8-94 build, no vented disk.

but the parts besides the driver side ebrake cable look like they never been replaced >< WTF but enh, so i replace . Thanks guys.