The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

255 re-wire kits

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

The stock wires are too small to carry the amount of amperage the pump draws. My car would actually start leaning out as rpm climbed until I ran 10ga wire from the bat to a relay then pump and a 10ga ground right from the pump. That solved the issue.
 
You don't technically need one. It's just a good idea to rewire any pump for more flow.

And you don't have to buy a kit to do it if you are going to, it's just a little easier than gathering up everything you'll need piece by piece.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top