JFZERO ECLIPSE
15+ Year Contributor
- 749
- 11
- Jul 20, 2004
-
Altoona,
Pennsylvania
I am currently having a few small issues with car mainly while slightly on the gas the o2 sensor does not cycle even though it is in closed loop... but on decel it does cycle like it should.... Is it correct?
Also the car being an automatic I had my fiance put the car in drive and from there I adjusted the biss little by little until it settled at 30 for the isc position...giving some time after each little adjustment to be read and accounted for by the ecu... tps volts is a solid .63 other than that I have not touched any settings and it is bone stock with 390's and a 43psi fpr (hence me being auto)...
On the drive home car ran great but once I put the car in park the idle jumps up to roughly 2000-2200 but I did not grab a log of that.
Won't let me post it due to exceeding the the forums size limit...
Edit x2 went to the clip selection and it saved the portion the I wanted it to throw away....thus I have no log to insert now....Go figure....
Also the car being an automatic I had my fiance put the car in drive and from there I adjusted the biss little by little until it settled at 30 for the isc position...giving some time after each little adjustment to be read and accounted for by the ecu... tps volts is a solid .63 other than that I have not touched any settings and it is bone stock with 390's and a 43psi fpr (hence me being auto)...
On the drive home car ran great but once I put the car in park the idle jumps up to roughly 2000-2200 but I did not grab a log of that.
Won't let me post it due to exceeding the the forums size limit...
Edit x2 went to the clip selection and it saved the portion the I wanted it to throw away....thus I have no log to insert now....Go figure....
Last edited:
