Brand new Forced Four Smart 150 TCU. Never installed, preloaded software for a W4A33 Auto trans. This was optioned for no TCU in car
Includes everything to run your GSX in place of a factory TCU. Full 24 inch harness and USB cable to connect to, along with paperwork and install instructions...
Let’s see if we can find what’s left out there! Please use this thread to post any links found for the Planetary Gear Assembly for the auto trans! Please post year make and model the trans came from!These are getting very scarce out there and where trying to hunt them down!Face book links...
I have a transmission out of a 98 GSX, i was told it was rebuilt and had no more than 80k but I can’t verify. It would be a good core for a spare or to build. Would prefer local pickup but can ship if buyer pays. Located in Blountsville Al
Hey looking to see if anyone has successfully used a dump valve on an auto trans? I know Kevin @kighly did some testing years ago but not much info on it.
Howdy yawl LOLA lot of information for our transmission (w4a33) can be found on the first link of the W4a33 wiki, 95, 96, 97, 98, 99 Mitsubishi Eclipse GSX/GST automatic 4wa33 upgrade guide/information (please add if you know of any extra parts/vendors/suppliers/guides)Information for the...
I have a mirage project with everything needed to put a 2g w4a33 transmission in. Axles, kiggly 6bolt in a 2g kit, all the engine mount points were fabed for the 2g trans. So i found and bought a built transmission i thought was the same with code W4A33K1UP6 which is actually an auto from a 1g...
I just bought a transmission for my mirage build that was already upgraded and the code on it is W4A33k1UP6. The one that came out of my old talon was W4A33k1UPQ2. I found a website that seems to list most of the 1g and 2g trans codes but didnt see the 1up6 on the list anywhere and im hoping i...
Hi buddies!I'm from Malaysia and I need some advice or guidance on my ride from fellow DSM members. Prior to reading the below, I wish to thank you in advance as it'll be a lengthy review and to apologize in advance if this topic may have been discussed before previously though I've attempted...
When we acquired an automatic, one glaring difference was the shift lever off the transmission is (almost) as awkwardly tall as the shifter inside the car; and is right where you want to run the intercooler piping. This lower profile shift lever is ~1″ vs. the factory 3" tall, and has been...
sorry this is so long, dont be scared ive listed alot of stuff so you guys can help me!issue:free rev with overdrive on , off no issuesalright ive researched alot even replaced my pulse generators due to them being out of spec .
this fixed some shifting issues but now i lost over drive it...