The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Post a Question

cas

  1. 1G turbo no cold start, runs with ether to start it

    Hi all. Not a complete newbie but it’s been 15 years or more since my last DSM.I have a 92 turbo FWD manual. The car has spark, it has fuel but won’t fire the fuel pump on start up. Had the caps replaced in the ECU, tested my signals to and from ECU and noticed the only concerning item I have...

  2. 1G CAS clearance + crank/cam sensor options for 4G64/63 hybrid (RWD / Starion)

    Hey all,I’m putting together a 4G64/4G63 hybrid for a RWD Starion swap and have a few CAS / trigger questions that I haven’t been able to find a clear, first-hand answer to.Setup:Wide-block 4G64 (Asia-sourced short block) 1G 4G63 DOHC head (bare head) RWD application (Starion chassis)...

  3. 1G Ignition terminal

    Hello fellow DSM'ers. Can someone pls explain to me how to set ignition timing CAS(1G N/A). Mine is set all the way clockwise(advanced) and engine works much better(It was in the middle before). The car struggles and blows black smoke when pushing acceleration pedal. As far as I know - I need to...
  4. AdamBaughman

    1G CAS problems, now won't start

    Have a 93 GSX that I 6 bolt swapped. Have been having idle issues for a long time. Found a cracked injector, solved the misfire. Timed ignition 5* was even a little bit better but every once in awhile upon warm start up it would smoke like a civ and was missing/running super rich.I didn't know...
  5. Will Kellermann

    Resolved 2G What is the part number/size of the bolts that hold in the 1Ga CAS (camshaft angle sensor) to the head of the engine?

    Hi everybody, I have a 1ga camshaft angle sensor (CAS) installed on my '95 GSX. It's the silver colored circular CAS that bolts on to the tranny-side of the engine head from the early 1g DSM's.The Good:It works perfectly (installed correctly at the right angle, car runs smooth). It's in...
  6. Ecotecdriver

    Type of CAS (Camshaft position sensor)

    Bought the car like this and did an engine rebuild. Im putting everything in its place now but I´m missing the Camshaft Position Sensor. I did some investigation and I noticed that some of this cars depeding the year may have a Crankshaft and not a Camshaft Postion Sensor . Is this the right...

  7. ECMlink car starts and stalls with cas unplugged. when plugged in wont start 2g 7bolt

    okay so basically as title reads everything hooked up no leaks cas unplugged turns the car over then it stalls. but when i plugged in the sensor it wont crank over at all. its a 95 ecu in a 98. i did the option on link for the cas. wiring is all fine persumably its plugged in ecu right and same...
  8. Gamble97

    For sale Freelancer FS: 2g aluminum coolant tanks & aluminum blacktop cas covers

    3 different styles of blacktop CAS covers. Only have 1 of each. (will not fit green top) $45 shipped each within the USA Shipped via USPS2g aluminum coolant tanks Comes with 1/4" barb fittings Fits in factory location between headlight and intake Fits with short route piping like the VRSF kit...
    $45.00 to $150.00
  9. CNC Billet CAS caps

    For sale Freelancer CNC Billet CAS caps

    Hey Guys, I've been selling this caps locally (and Facebook lately) and i figured out i would give the forums a try. As an effort to bring more people to use the forums again I'm giving a 5 USD discount on every cap that's sold over here.These are CNC machined 6061 T6 aluminum caps and are a...
    $35.00 to $55.00
    $30.00 to $50.00
  10. all black 4G63

    Resolved 1G CAS signals

    Are the 92, 93 and 94 CAS output signals the same?I need to use a 93/94 CAS with a 92 ECU.All I know about the CAS sensor I am using is that it has the black plastic cap, but not 100% sure which MY it is out of.Thank you for the info.
  11. NorthEasternGSX

    2G 90-96 Cam Angle Sensor test help needed.

    So my 95 eclipse GSX has had engine cutout on and off recently while on the road, and now it wont start at all. No spark, no fuel. My research suggests to check the Cam angle sensor (Cam), then the Crank Position sensor, then finally send the AEM engine management system (ems) back to be...
  12. pieceofcloth

    Sold .

    .

  13. 2G 97 camshaft sensor on a 96

    I have a 1997 gst. I recently put a 1996 gst engine on it but it doesn't want to start up. Can I just put the 97 camshaft sensor on the 96 head without having to tap the cam? Please help. Many people have different opinions on this matter. Whats the easiest way?
  14. all black 4G63

    Haltech CAS and CKP sensors

    Is it common to use a 2G CAS on a 1G 6 bolt (90 TSI)? When ordering the Haltech 4G63 terminated harness they can custom fab it for a 2G CAS for a 1G engine. Has anyone installed the Kiggly Racing CKP kit for a 1G using the Haltech terminated harness with the Elite 1500, is there anything in...

  15. 2G CAS wires snipped?

    I picked up a 95 gsx in a trade I got it with a blown turbo, rebuilt it and started to drive it. I got around 300 miles till it just died on the road. Everytime I start it idles on 2 cylinders for a few seconds then dies. I noticed that the CAS was snipped, could this be my problem? If so why...
  16. Artago

    2G CAS test?

    How do I test a 2G CAS (under cam gear style)? I'm sure this has been answered but I can't find the procedure.
  17. 93AWDDSM

    For Sale 1g 91-94 Cam angle sensor

    all I have left is the Cam angle sensor, used in working condition.I'm looking to get $30 FIRM plus buyer pays shipping fees. (Shipping comes to $8 so total would Ben $38 via paypal! Not bad for a CAS!)Can't beat a deal like this! If interested let me know right away! 360-601-7716 let me...
  18. Dasean Real

    2g 6 bolt swap CAS adapter harness

    I have a 98 gsx, 6 bolt and 98 black box ecu. i have a fresh adapter harness for the CAS and i am unsure where to connect the 4th white wire on it
  19. mintalontsi

    1G CAS install causing poor performance

    Hi all, for the past couple of months i've had a CEL for my CAS. Recently it started to get bad with the car breaking up and hesitating under WOT.I replaced the broken CAS with a new CAS from RockAuto. I set the motor to where the cam angle marks lined up, installed CAS, grounded, and set...
Boosted Fabrication
ECM Tuning
ExtremePSI
FIBA Motorsport
Fuel Injector Clinic
Innovation Products
Jacks Transmissions
JNZ Tuning
Kiggly Racing
Morrison Fabrications
Rix Racing
RockAuto
STM Tuned
Support Vendors who Support the DSM Community
Back
Top