This is the Build Thread for 1992 Eclipse GSX. Reply below.

SPOTTED IN THE WILD!
South I5 between Olympia & Tumwater

Speed bleeders (m10x1.00)
1g Rear brake caliper total rebuild
FTP braided brake lines from JNZ

It’s a good weekend so far!

Finally got the FTP braided lines installed and completely bled and WHAT A DIFFERENCE! haven’t road tested as it got hot out and I still need to degrease and wash the car before putting the wheels on but I am happy.

Still need to adjust the ebrake. Additionally I discovered a seized ebrake line on the passenger rear. Rockauto incoming.

Got the rear done today with the last pieces being a bracket system for the rear lines.

Brakes officially done!

Finally installed a 3g Master cylinder to pair with my outlanders. I’ve only bench bled the master and bled all 4 corners; still on jack stands. Letting everything sit and settle - re-bleed all 4 corners and then take it for a test drive.

Tad close to my strut bar and now have to reconfigure my ignition pack placement and extend the fluid sensor.

Just because