This is for a 1G FWD. A drag suspension air lift kit. In the later 90s. Believe it was Dejon Tool. The original guy. Had such a setup on a 90 TSI fwd. Saw it at the Shootout. This was before he was making intercooler pipes and setups. He made me one for a 90 GST drag car I had. Sent it...

1G cy head. Stainless valves. BC springs and retainers. Stainless exhaust manifold studs. Good clean condition. Intake cam journal on head needs welded. And machined. Comes with a good cap. Engine had broken a Web cam near the sprocket. All the other journals and caps are in good...

1990 IAC solenoid. Have two available. Excellent condition. Price is shipped in a USPS flatrate mailer.

*Update* Added more pictures Car is pretty much whole, 1990 wiring harness, fuel tank, all interior (minus the rear trim), HVAC, Dash, door panels, pedal assembly, front subframes braces all installed. Driveshaft, Non Socketed ECU included.Really just needs engine, trans, tcase, shifter...

Six bolt auto flex plate with spacer washers. Good condition. Message 702-741-6987

You must be registered to see element.Used right side (passenger) upper quarter window trim in good condition - tried to capture any imperfections in the pictures. Shipping and PayPal fees included. I will only deal through PayPal.Please PM me on here if interested - first come, first...

TD05 wastegate canisters. Have both fixed rate and adjustable. Fixed fits the smaller WG pin of 6mm . Adjustable is 7.75mm Can get two into a USPS flatrate mailer. Quantity discounts. Have almost 50 of these. Found another box. Message 702-741-6987

1g intake manifold. 4 inch plenum. 2 1/4 runners. Ford TB flange. Comes with throttle cable. Have three of these. This one was made so the plenum could be flipped for AWD or RWD setups. Runner lengths can be adjusted. With old turbo technology 25 years ago. Ran 7’s 185. The math on...

1g TD05 oil feeds. Found another box. Have 15 feeds. Have no return lines left. Been running these same lines for a many years on my daily driver talon. $15 for a feed. They easily ship in padded flatrate USPS mailer. Message 702-741-6987

Dejon tool intake pipe for 1g. No bov recirc provisions. $70 shippedMaf sold already

Three speed design 1g scatter shields. Stainless steel. Have half a dozen 1g Fwd. ($95) two Evo 7-9. ( $185). All new. Well made. Ups ground been averaging $15-18. Message 702-741-6987

1g upper pipe. Early BR. 2.25 inch Stainless. Bead Rolled ends. BOV flange is gone. These were designed to be used with a stock 2g elbow that’s included with the pipe. Message 702-741-6987.

Two TB elbows. One is 2.25 other is 2.5. Mild steel. 2.25 has ringlet, 2.5 is bead rolled. Message 702-741-6987

TD05 and T3 flanges. Stainless and Mild steel. 13mm thick. Mild flanges are $20. Stainless $25 Or buy multiplies in combination and discount. Currently have 4 SS TD05. Zero mild steel. 7 SS T3 and 9 T3 in mild steel. Ships in USPS flatrate padded mailer with tracking. Message 702-741-6987.

Various flanges T3 turbine entry Stainless and 5 bolt exit, mild steel . 2.5 downpipe two bolt. Mild. 2g or Evo rear muffler flange mild TD05 entry are Stainless. Throttlebody. Oil flanges. Etc.

Talon had about 125,000 miles, regular oil changes, I do not think it was every milled