Wiring for tail lights ????????

[STECARS]

OK, I'm almost done with my supra conversion and was wondering if anyone knew anything about wirng the supra lights to stock wires.? Possibly a link to a How-To, but any help is greatly appreciated , thanks guys.

steve

 

[Spidey]

You can follow the JDM/Euro tail wiring write-up in the Tech Article section, you need to do the same things pretty much(dedicated turn signals without the brakes on the same wire, etc.) The only thing after that is the reverse lights and that should be simple.

 

[STECARS]

Thanmks I'll check it out, but maybe be totally different since these are for a toyota not a jdm eclipse

 

[tunerkid]

pics of your car/tails please!

 

[Raph]

Thanmks I'll check it out, but maybe be totally different since these are for a toyota not a jdm eclipse

the principle is the same tho..Running lights and Brake light together,Turnsignals separately

running/brake light use a P21w/5w bulb (2 filament bulb)

turnsignal a P21w bulb (one filament)

 

[Spidey]

Thanmks I'll check it out, but maybe be totally different since these are for a toyota not a jdm eclipse

It is the same idea, like Raph said, to have the running lights and brake lights seperate from the turn signals. The other thing is do the stock bulbs/sockets fit into the Supra tails? Have you tried?

 

[STECARS]

I JUST WENT THRU THE EUROTAILS/AMBERTAILS THREAD, and i read that eclipse and talon wiring is different . I have a a talon , so blinkers and brake lights are alreadyv seoperate wiring. Also my suopra tails came with all the wiring and bulb sockets and bulbs. So i was really just looking to use/utilize both harnesess and use the connectors so that nothing is permanantly wired or damaged. The whole concept of my conversion is that it it easily removable and can convery back to stock by just bolting in new stock tails, So pretty much
"i can go supra and still come back to stock" all i need are new stock taillights. I just really need to know what wires from the supra harness match up to my talon wire, ( color specific ).

 

[Raph]

I JUST WENT THRU THE EUROTAILS/AMBERTAILS THREAD, and i read that eclipse and talon wiring is different . I have a a talon , so blinkers and brake lights are alreadyv seoperate wiring. Also my suopra tails came with all the wiring and bulb sockets and bulbs. So i was really just looking to use/utilize both harnesess and use the connectors so that nothing is permanantly wired or damaged. The whole concept of my conversion is that it it easily removable and can convery back to stock by just bolting in new stock tails, So pretty much
"i can go supra and still come back to stock" all i need are new stock taillights. I just really need to know what wires from the supra harness match up to my talon wire, ( color specific ).

the colours prolly wont be the same..but its a piece of cake since u have a talon...

just use connectors,leave the talon harness in an run the supra harness off it..no big deal