420A Wire Location

[BLACK'98DSM]

Can't remember where this hooks up to... I know it just needs a good geound spot but it'd be great if I knew where it originally went. It won't reach very far. Help? Thanks

You must be logged in to view this image or video.

 

[dsmcrzy]

On the block near the block to transmission bolt is where I had mine before I did the wire tuck. If you zoom in my the #4 cylinder runner in this pic you will see it.

You must be logged in to view this image or video.

 

[DirtMcGirt]

That looks to be the capacitor that bolts to the drivers side of the valve cover.
(Identified in blue in pic below)

You must be logged in to view this image or video.

Pic copied from 2gnt.com

 

[spyderdrifter]

On turbo DSMs, there's an item like that bolted to the intake manifold. You could always do the same.

 

[shinzon]

It's for suppression of electrical interference from the ignition. You'd pick up the coils as interference in the radio without that wired in and grounded to the intake manifold/head.

 

[BLACK'98DSM]

I put it on the side of the valve cover on one of the extra bolt holes. Thanks guys.