Which intake to buy for stock 1g

[FittipaldiTalon]

Im confused as to which intake pipe I need for a stock 1990 eagle talon tsi. In the tech section there are multiple intakes for all different things and some have different nipples for tubes and whatnot. What do I need for a stock 1g turbo. I plan on keeping it stock and eventually putting on a mbc.

Thanks for the help

Can I find any on ebay?

 

[toofast82]

Check out Dejon or Injen. They have them for every mass air/recirculation/nipples,etc

 

[jrohner]

ebay!

 

[95GSXCO]

+1 no need to spend a ton of money if your just going to keep it stock.

 

[FittipaldiTalon]

i cant find one for the turbo on ebay, theres only one
eBay Motors: DSM Intake Pipe VPC EMS 3" Black (item 110351588400 end time Apr-15-09 11:02:20 PDT)

would that bolt directly on?

thanks

 

[coryf1233]

I just did a dejon 3 in intake, i had to use a 2-3 inch reducer but works great..

cost was around 150 for everything.

 

[95GSXCO]

Or this one eBay Motors: Mitsubishi Eclipse 90-94 Turbo Air Intake System (item 260382189267 end time Apr-02-09 09:39:49 PDT)

and grab your MBC while your at it shoot a best offer for $15.00 and it should take it. This one has been proven time and time again not to mention lifetime warr. eBay Motors: NXS MANUAL BOOST CONTROLLER CELICA TURBO STI XS WRX MBC (item 250351868837 end time Apr-06-09 19:41:51 PDT)

 

[Dsmj89]

For an intake you can get an ebay intake or dejon intake pipe, they aren't that expensive.
As for the mbc, i wouldn't run a cheap MBC, play it safe and get yourself a good MBC such as a hallman.
EXTREME PSI : Your #1 Source for In Stock Performance Parts - Hallman PRO Boost Controller Kit

 

[FittipaldiTalon]

so just to be sure both will bolt on directly? thanks guys

 

[95GSXCO]

For an intake you can get an ebay intake or dejon intake pipe, they aren't that expensive.
As for the mbc, i wouldn't run a cheap MBC, play it safe and get yourself a good MBC such as a hallman.
EXTREME PSI : Your #1 Source for In Stock Performance Parts - Hallman PRO Boost Controller Kit

I wouldn't worry to much about paying $100.00 for a ball and spring! I have the ebay one on my car pushing 30psi and it works great. Plus remenber he is keeping it stock for now. But its up to the OP if he would rather spend $100.00+ to turn his boost up not even 10 more psi then more power to ya. I will say the Hallman's sure do look pretty under the hood.

 

[FittipaldiTalon]

DEJON | Powerhouse

Which intake would fit a 1g with stock turbo, and stock 1g MAS?

sorry if thats a dumb question

 

[tunethis]

DEJON | Powerhouse

Which intake would fit a 1g with stock turbo, and stock 1g MAS?

sorry if thats a dumb question

Just make sure you get the 2 3/4" size at the compressor. CIP-1gPy - $105 w/ all tubes). That one comes with all the necessary tubes on the intake pipe.

 

[LTUDSM]

Im confused as to which intake pipe I need for a stock 1990 eagle talon tsi. In the tech section there are multiple intakes for all different things and some have different nipples for tubes and whatnot. What do I need for a stock 1g turbo. I plan on keeping it stock and eventually putting on a mbc.

Thanks for the help

Can I find any on ebay?

IF you need a n intake pipe for your stock dsm,i would suggest getting the one,with that extra nipple for the hose,that goes from your valve cover to the intake pipe,(Crankase ventilation) Injen and dejon doesn't make these......maybe they do,but i never saw one like this....

 

[knochgoon24]

I have an ebay one on my 2g and it works great. Definitely made the turbo louder. Not sure if it affected much else. I'm going to box in the filter sometime here so I get colder intake temps.

 

[coryf1233]

you can run a 3in intake if you choose, just get the reducer, also dejon makes both the charcoal canister and crankcase nipples on the intake, you pay an additional amount somwhere around 10 dollars i believe, on a stock setup i would reccomend running all nipples, bov recirc, charcoal canister, crankcase vent

 

[asrdave]

+1 dejon
they make 3 inch pipes for 1gs with the propper bov recirc location
im pretty sure if you call and talk to them they can make one with nipples
for everything else you need to run