Where to tap for Fuel Pressure gauge

[AWD Lox]

Hey guys, I am a total newb when it comes to the 4g63 motor. I have searched high and low and not been able to find out where I can tap for a Fuel Pressure gauge. I have a greddy gauge on its way and I would like to know the best/safest place to get the reading for the sensor. Pics would be great if you have them. Thanks

Brett

 

[Scrymerr]

I have a B&M underhood gauge that came with a replacement banjo bolt for the fuel filter outlet. It is tapped 1/8" NPT on it for a fuel gauge. Im sure you could find something like that (or just spend the $35 and then sell the fuel pressure gauge for $20) and then use that for the sender.

Good luck

 

[Blue92]

An option might be to get a SS line for the rail line from the filter. Then you could get a fitting for your sender, I presume it is electric. I made my own line for pretty cheap, and some vendors sell them too.

 

[Spyke169]

I've seen people tap the fuel rail and put a guage on top of it

 

[Awdboost]

Drill and tap the bolt on the top of the Fuel filter. It's 1/8 ntp