Where else can I tap my Boost Controller?

[Boost95]

Where can I tap my boost controller other than the BOV vac. line? I dont want to tap it into that because I am running 21psi on the turbo XS MBC and it is bleeding off so much that it not allowing my bov to see enough vacuum to open it up. Let me know where to tap er

Thanks,
Mike

 

[92awddsm]

The best place to tap it is either the compressor housing or licp. Since you have a 16g, do you still have the port on the turbo outlet? If not, I would have one installed.

 

[Boost95]

No,I no longer have the nipple on the outlet. I have a Buschur J-pipe. I really dont want to get one welded on. Are there any other options? Any of the ports on the TB? Thanks for your reply.
-Mike

 

[DiamondStarM]

I use the RRE lower 90 degree bend after my dejon tool j pipe. It has a nipple on it and thats where I get my source from. Nice and close to the turbo like it should be. Doesnt affect the bov at all.

 

[oldman]

1/4" 1/8 npt nipple fitting, 1/8 npt tap, 5/16" drill bit (11/32" will do as well), thread sealant. Tap the J-pipe on a flat surface near the flange so you can grind off the extra threads with a grinder/dremel.

 

[92AWDHX40]

Yep just drill a hole in the j pipe and get a fitting for it.