What thread on coilovers do I need to be at for height? GC/AGX combo

[dsmdeliveryboy]

So I have KYB AGX's and GC sleeves and recently picked up some Evo 8 wheels and am wondering what thread I should have the coilovers set at to have fender sitting right above the tire. I'd figure it out myself, but I figured I'd ask so I don't have to spend hours jacking my car up and down.. The tires are 235/45/17's. A stance exactly like this, maybe a tad higher:
http://www.picpile.net/ims/pic_265Q8RL/43634.jpg
Or like this(thank you gofer!)

You must be logged in to view this image or video.

 

[RamenPride]

I'd figure it out myself, but I figured I'd ask so I don't have to spend hours jacking my car up and down..

unfortunately that's the only way. when I had coilovers, the car was level but all the perches were set differently.

 

[dsmdeliveryboy]

unfortunately that's the only way. when I had coilovers, the car was level but all the perches were set differently.

Damnit, this took FOREVER when I did the JIC's on my old Evo. Was hoping it would be a little easier this time Lol.

 

[LandoAWD]

Weight of the car, spring sag, etc, etc...you gotta do it the hard way.

 

[dsmdeliveryboy]

Weight of the car, spring sag, etc, etc...you gotta do it the hard way.

Yeah we'll see what happens..

 

[LandoAWD]

Set all of them to the same thread initially, lock the collar, set the car on the ground, then just measure. I think it took me 3 good tries to be happy with the setup initially....first attempt had the wheels up in the fender liner.

 

[dsmdeliveryboy]

Set all of them to the same thread initially, lock the collar, set the car on the ground, then just measure. I think it took me 3 good tries to be happy with the setup initially....first attempt had the wheels up in the fender liner.

Hahaha yeah I was gonna just throw them on the way I get them and go from there. He said he was running them on stock wheels just barely just dropped.