Updated lifters

[TALONTRAX]

I`m re-building a stock 2G head, complete valve job,springs,retainers guides,etc. So far, I`ve never had the infamous 2G lifter tick problem, however now that the head is off, should I go with revised lifters?
Also,what are these different lifters,I`ve heard them referred to as 3G lifters? Any chance anyone has a oem part# for these puppies?

Thanks . . .

 

[RED TREAD 97]

partsdinosaur.com has them for way less than the dealer. They are the exact same thing, and they are supposed to be from the same manufacturer the dealer orders from. Check'em out, I got mine from there.

 

[tbonitz301]

EXTREME PSI : Your #1 Source for In Stock Performance Parts - Topline Revised Lifters : Mitsubishi Eclipse 90-99

 

[Splitpi]

The 3G means "3rd Generation" of the lifters... not to be confused with 3rd Generation Eclipse.

4G63T Mitsubishi Lash Adjusters
https://www.jacksonautomachine.com/html/shopping/list_section.cfm?sectionId=2

Just two sites of many that carry them. I have absolutely no reservations about ordering from either of these sellers.

 

[tbonitz301]

Damn dial up

 

[marcelo_caz]

get the 3G lifters.. its the one I got right now on my beast

 

[TALONTRAX]

Sounds like a no-brainer at this point . . . Definately going with the 3rd.gen lifters
Thanks everybody

 

[dsmfa9nutter]

They're on ebay for about $90 a set.

 

[bmoha2]

How hard to put in?

 

[98GSXtreme07]

Theres a few write ups on here on how to do it. Kenamond has a great write up on how to do it.
Here ya go!

http://www.dsmtuners.com/forums/articles-engine-fuel/265060-how-replace-lash-adjusters-lifters.html