Turbo Oil Leakage

[And_44]

Okie, Sorry if ya'll are tired of my rambling post for the no start. BUT got it fixed Now that's fixed I have an oil problem. Got it started ran up and down street down at end of street had a nasty cloud of smoke coming for engine bay. Not from exhaust but from oil being pumped onto the exhaust side of turbo. It's alot of oil. I got it home poped hood and whole exhaust side of turbo is covered from the turbo down had it dripping down exhaust pipe about to mid car, and a nice sized puddle under car. The oil is OLD, i checked the oil level and it's about a quart over..... and noticed that the coolant was low, gonna top off the coolant but before doing an oil change, anyone have any idea's as to where it would leak from also if the oil level is to high where does it go? Could it overflow itself onto the exhaust side of turbo or any where else? I know in some cars it goes into the Cataltic(spelling?) converter and burns there and through exhaust. But I believe this has no Cat converter so where oh where does the oil go? Waiting for it to cool down before going out and checking hoses got pretty hot fast. Thanks any input would be greatly appreciated

 

[DSM_PWR]

Check
*Valve cover gasket
*The exhaust manifold stud that plugs the oil hole (bottom row, middle stud)
*Turbo feed/drain lines/gaksets

 

[And_44]

LoL found it. Just bought car a week ago and figuring out all what was done to, and not done to it. The previous owner put a tubular exhaust mani on it and guessing and hoping didn't have enough room to put a bolt in the hole on bottom between 2&3rd cylinder, kinda flings out oil when running. Gonna go get a replacement bolt for it, also some Permatex® High Temperature Thread Sealant if it's stripped well gonna try some RTV heard the copper is the best for this application.

 

[And_44]

Close this thread as Solved Just used some Copper RTV let it sit over night and drove car around town for about an hour to burn off the oil on exhaust No leak, new M1 Synthentic oil.