Turbo info

[Boomshine]

Hey guys, i would like to know what kind of turbos you guys are all running and which rpm's full boost hits. I think this would be a very helpful post that would infrom lots of people. lastly listing what supporting mods you also have would be very helpful too.




thanks boomshine

 

[turboinside]

Stock turbo, Hits 15p.s.i. at 2980 r.p.m.

My supporting mods are full custom exhaust, modified air box, modified intake pipe, Greddy blow off valve, boost controller free mod, centerforce clutch, and adjustable fuel preasure regulator, and re-wired fuel pump

 

[9t1TSi]

I ran my Evo3 16g at 23psi and it hit around 5,000 (With out it being tuned)

My mods were.... look in my pro.

Im planning on running 19lbs with my 20g and reacing full boost at 4000-4500

 

[dsm-onster]

I get to 19 psi at 2700 . I have to say that what made the difference with spool up was the GM MAF Translator in blowthru. Plus, i have 2.5" exhaust w/ testpipe and flowthrough muffler design. Oh, and a K&N (everylittle bit helps). Tuning will help with spoolup too. I noticed that as i have been leaning her out with dsmlink, i am getting full spool earlier and earlier. It's beginning to feel like a roots blower on a N/T

I have supporting fuel mods (650s, Walbro 255HP, DSMLink, & H2O injection )... those are more important than mods that increase spool or flow.

 

[blcknspo0ln]

This is probably a good thread with good intentions, but this has been asked time and time again.

If you wanted to, you could probably search and compile a list

just to contribute:

t25 - 16 psi - 2900 rpms
e316G - 20 psi - 3500 rpms
SBR G50 - ?? - ??? [currently being installed]

do you see the "money pit" trend yet? !

 

[oldman]

I ran my Evo3 16g at 23psi and it hit around 5,000 (With out it being tuned)

My mods were.... look in my pro.

Im planning on running 19lbs with my 20g and reacing full boost at 4000-4500

Something must be wrong, those are terrible numbers for EVO3.